Choose Your Spray Applicator Comparison Chart - Adhesive Applicators
 
 
Spray Applicator UFD Fiberized Spray UFD Equity Fiberized Spray UFD High-Speed Fiberized Spray DeltaFx
Fiberized Spray
APEX PrecisionCoat Helix Rotary Spray Vector Metered Spray Adapter
 
         
Max. No. of Modules 6-14 1-6 1-6 1 1 N/A 40
Spacing Between Nozzle Centers 25.2 mm 25.2 mm 25.2 mm N/A N/A N/A 25 mm
Temperature Range 38°C to 218°C (100°F to 425°F) 38°C to 218°C (100°F to 425°F) 38°C to 218°C (100°F to 425°F) 38°C to 218°C (100°F to 425°F) 38°C to 218°C (100°F to 425°F) 40°C to 170°C (104°F to 338°F) 38°C to 218°C (100°F to 425°F)
Warm-up Time 30 min. (cold start) 5 min. (module change) 30 min. (cold start) 5 min. (module change) 30 min. (cold start) 5 min. (module change) 15 min. (cold start) 15 min. (cold start) 30 min. (cold start) 45 min. (cold start) 10 min. (module change)
Adhesive Viscosity 100 to 30,000 cps* 100 to 30,000 cps* 100 to 30,000 cps* Lab Test Required 100 - 20,000 mPas sec
(100 - 20,000 cps)*
500 to 50,000 mPas* 100 to 30,000 cps*
Max. Adhesive Pressure 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi) 68 bar (1,000 psi)
Air Pressure Range 4.1 to 6.9 bar
(60 to 100 psi)
4.1 to 6.9 bar
(60 to 100 psi)
4.1 to 6.9 bar
(60 to 100 psi)
4.1 to 6.9 bar
(60 to 100 psi)
4.1 to 6.9 bar
(60 to 100 psi)
4.1 to 6.9 bar
(60 to 100 psi)
4.1 to 6.9 bar
(60 to 100 psi)
Supply Voltage 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz 200-240 VAC 1 Phase 50-60Hz
Dimensions (HxDxW) 261 x 146.3 x 50mm
(10.28 x 5.76 x 1.97 in)
269 x 222 x 151-350 mm (9.31 x 8.74 x 5.95 in) 133.5 x 222 x 151 -350 mm (5.25 x 8.51 x 1.97 - 5.91 in) 261 x 146.3 x 50mm
(10.28 x 5.76 x 1.97 in)
192 x 216.8 x 50mm
(7.54 x 8.54 x 1.97 in)
48 x 24.1 x 37 cm
(18.9 x 9.49 x 14.57 in)
261 x 146.3 x 50mm
(10.28 x 5.76 x 1.97 in)

 Note: All above information is dependent on line speed operation and type of adhesive, some results may vary.
* Adhesive Dependent

ITW Dynatec GmbH | Industriestr. 28 | 40822 Mettmann | Deutschland | Telefon: +49 (0) 2104-915-0 | Telefax: +49 (0) 2104-915-111 | info@itwdynatec.de